Using The Radio; Using In Pc Monitor Mode - Philips 26PF9320/10 Mode D'emploi

Using the radio

Choosing radio mode
Â
Press the key on the remote control to
switch the TV to radio mode. Press the
key to return to TV mode. In radio mode the
number and name of the station (if available),
its frequency and the sound mode are
indicated on the screen.
Selecting programmes
ñ ô
Use the / or
- P +
FM stations (from 1 to 40).
List of radio stations
T
Press the key to display / hide the list of
radio stations. Then use the cursor to select a
station.

Using in PC monitor mode

NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality VGA/DVI cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
The PIP function lets you display a
superimposed image to watch the TV channels
at the same time.
You must first of all connect the computer and
adjust the resolution (see p.12).
Choosing PC mode
U
Press the key on the remote control to
switch the TV to PC-A mode
PC-D mode
(DVI-D In)
return to TV mode.
If there is no PC signal for more than five seconds,
the TV automatically goes into standby mode.
Using PIP (Picture in Picture)
While in PC mode you can call up a window
for TV channels.
Attention: the PIP feature is only available if a
computer is connected to the DVI-D In (see p. 12).
g
& Press the
key to display the PIP screen.
The television image is reproduced in a small
superimposed window.
é Subsequent presses of the
the size of the window, switches to dual
screen and turns PIP off.
" Use the
keys to change the programmes
- P +
of the PIP screen or the
display a picture from an appliance connected
to the TV (e.g. video recorder, DVD).
W
keys to select the
or
(VGA In)
W
. Press the key to
g
key changes
µ
key if you want to
Using the radio menus
h
Use the key to access the specific radio
settings.
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the
Install
(for a complete search) or
a station by station search).These menus work
in exactly the same way as the TV menus.
Screen saver
In the menu you can activate / close
Features
the screen saver.
Using the PC menus
h
Press the key to access the specific settings of
the PC monitor mode. Use the cursor to adjust
them (the settings are automatically saved) :
• :
Picture
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical
and vertical placing of the image.
- : to adjust the colours (cold,
Adjust Colour
normal or warm).
• : to choose the sound
Audio Selection
reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while
you use the computer.
• :
Features
- * : eliminates the horizontal
Phase/Clock
( ) and vertical (
Phase
- : to choose between large screen
View Format
or the original format of the PC screens.
- : to adjust the size and position
PIP Controls
of the PIP screen.
- : position is set automatically.
Auto Adjust
•
Reset To Factory Setting
factory settings (default settings).
• : to come back to TV or radio
Mode Select
mode.
*These adjustments are not available when a
computer is connected to the
menu :
Auto Store
(for
Manual Store
: to adjust the
: to adjust the horizontal
) interfering lines.
Clock
: to return to the
.
DVI-D In
9