Requirements, Warnings And Limitations; Harness Preparation - Honeywell Miller AirCore Mode D'emploi

3 . 0 Re q u i r e m e n t s , Wa r n i n g s
a n d L i m i t a t i o n s
Users must read, understand and follow all requirements, warnings and limitations
provided in the Miller Harnesses and Body Belts instruction manual (I119) as well as this
supplement.
Fall protection connecting devices should be attached to the back D-ring. A front D-ring
may be used for fall arrest only in applications where the personal fall arrest system
limits the maximum free fall distance to 2 ft. (0.6m) and limits the maximum arrest force to
900 lbs. (4kN), such as climbing applications.
Side D-rings are designed for positioning applications only.
A personal fall arrest system must be in place and connected at all times when the Bos'n
chair is in use. The full body harness must be attached to a lifeline independent of the
work line used for suspension.
Bos'n chair D-rings are designed for positioning during suspension work only.
Bos'n chair steel or aluminum mating buckle connectors must be properly connected to
corresponding mating buckle connections on harness for use. Adjustment straps with
clips also must be attached to harness, but never use adjustment straps with clips as the
only means of attachment to the harness.
Tool loops must only be used for the attachment of light tools and tool bags. Never use
tool loops for lanyard storage, fall restraint, or any other purpose for which they were not
designed.
Always ensure that there is adequate fall clearance for the application.
4 . 0 H a r n e s s P r e p a r a t i o n
User Instruction Manual Supplement - English
Fig. 1
5