Heating Schedule Programming - CHAFFOTEAUX ARIANEXT Mode D'emploi Pour L'utilisateur

HEATING HOT WATER SETTING
To access the heating settings, press the OK button.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- CH settings
Press the OK button.
To set the fl ow temperature, turn the knob and select:
- CH Setpoint temperature
Press the OK button.
The display screen shows:
- T set Z1
- T set Z2
- T set Z3
urn the knob and select:
- T set Z1
Press the OK button.
Turn the knob and set the fl ow temperature for the selected zone.
Press the OK button to confi rm.
Repeat the above procedure to set the fl ow temperature for the other
zones, if applicable.
Press the back button "
Turn the knob and select:
- CH mode
(only in HP systems)
Press the OK button.
Turn the knob and set the operating mode of the heating elements:
- Green (excludes the use of heating elements)
- Standard (sets the normal operation of the heating circuit)

HEATING SCHEDULE PROGRAMMING

The Time program schedule allows for heating the environment ac-
cording to need. Press OK to set heating schedule programming. Turn
the knob and select
- Complete menu
Press the OK button. Turn the knob and select:
- CH settings
Press the OK button. The display screen shows:
- CH Setpoint temp
- Time program
- Holiday function
- Thermoregulation
Turn the knob and select:
- Time program
Press the OK button. The display screen shows:
- Free time programming
- Wizard tme programming
- Preset programs
- Time Programming/manual mode
Turn the knob and select:
- FREE TIME PROGRAMMING
Press the OK button. The display screen shows:
30
- All zones
- Zone 1
- Zone 2
- Zone 3
Turn the knob and select the zone in which you wish to apply schedule
programming:
Press the OK button. Turn the knob and select
- Set Comfort T
Press the OK button.
Turn the knob and adjust the room temperature value during the com-
fort period (the temperature value will fl ash on the display).
Press the OK button to confi rm.
" twice.
Turn the knob and select:
- Set Reduced T
Press the OK button.
Turn the knob and adjust the room temperature value during the re-
duced period (the temperature value will fl ash on the display).
Press the OK button to confi rm.
Turn the knob and select:
- Time program
Press the OK button. Turn the knob and select the day or days of the
week you wish to program.
Every time a day is selected, press the OK button to confi rm.
The days selected for programming appear on the display in a box.
Turn the knob and select save. Press the OK button and turn the knob
to set the start of the heating period corresponding to the fl ashing
value. Press the OK button to confi rm.
Press the OK button and turn the knob to set the end time of the
comfort period.
If you want to add new time periods, turn the knob and select Add
period; press the OK button.
Repeat the above procedure to set the start and end times for each
comfort period added.
Once programming is complete, turn the knob and select Save.
Press the OK button to confi rm.
Selecting Heating settings
Change heating hot water temperature