Quick Standby Search; Software Update; Troubleshooting & Tips - CONTINENTAL EDISON CELED55SA20B3V2 Mode D'emploi

The HbbTV applications are generally launched with
the press of a coloured button on the remote. Generally
a small red button icon will appear on the screen in
order to notify the user that there is an HbbTV appli-
cation on that channel. Press the button indicated on
the screen to launch the application.
HbbTV applications use the buttons on the remote
control to interact with the user. When an HbbTV
application is launched, the control of some buttons
are owned by the application. For example, numeric
channel selection may not work on a teletext applica-
tion where the numbers indicate teletext pages.
HbbTV requires AV streaming capability for the plat-
form. There are numerous applications providing VOD
(video on demand) and catch-up TV services. The
OK (play&pause), Stop, Fast forward, and Rewind
buttons on the remote control can be used to interact
with the AV content.
Note: You can enable or disable this feature from the HBBTV
Settings>TV Options>Advanced Options> menu in Live
TV mode.

Quick Standby Search

If earlier an automatic search is performed, your TV
will search for new or missing digital channels at 05:00
am every morning while in quick standby mode. Any
new found broadcasts will be added to the channel
list and missing ones will be deleted if you confirm at
the next power on. The search will be performed for
the set Tuner Mode in the Channels>New Channels
Available>Tuner menu in Live TV mode. This feature
will not be functional if the TV is in standby mode.

Software Update

Your TV is capable of finding and updating the firmware
automatically via the broadcast signal or via Internet.
To experience the best use of your TV and benefit
from the latest improvements make sure your system
is always up to date.
Software update via internet
On the Home Screen enter the Settings>Device
Preferences>About menu in order to update your
Android system version. Move the focus to the
System update option and press OK. You will be
informed about the system status and the time at
which the device was last checked for an update
will be displayed. The Check for update option will
be highlighted, press OK if you want to check for an
available update.
Over Air Download (OAD)
In Live TV mode enter the TV Options>Advanced
Options>OAD menu. You can enable/disable Auto
Download option for a firmware upgrade.
To start a manual download Highlight Manual OAD
Download option in the TV Options menu and press
the OK button to start a search for an available firm-
ware upgrade
manually.
Note: Do not unplug the power cord during the reboot process.
If the TV fails to come on after the upgrade, unplug, wait for
two minutes then plug it back in.
Troubleshooting & Tips
TV does not switch on
• Make sure the power cord is plugged in securely to
power outlet.
• Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
• Press the Standby/On button on the TV.
TV does not respond to the remote control
• The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
• Check if the remote control is working by means of
a mobile phone camera. Put the phone in camera
mode and point the remote control to the camera
lens. If you press any key on the remote control
and you notice the infra red LED flicker through the
camera, the remote control is working. The TV needs
to be checked.
If you do not notice the flickering, the batteries may
be exhausted. Replace the batteries. If the remote is
still not working, the remote control might be broken
and needs to be checked.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
No Channels
• Make sure that all cables are properly connected and
that the correct network is selected.
• Make sure that the correct channel list is selected.
• Make sure that you have entered the correct channel
frequency if you have done manual tuning.
No picture / distorted picture
• Make sure that the antenna is properly connected
to the TV.
• Make sure that the antenna cable is not damaged.
• Make sure that the correct device is selected as the
input source.
• Make sure that the external device or source is
properly connected.
• Make sure that the picture settings are set correctly.
• Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
English - 23 -
through the DTV broadcast signals