recording mode
administrator logged on
Note that actual screen icons might differ slightly from the ones shown above.
Quick menu bar
Note: only available when USB mouse is connected.
• Move the pointer towards the left of the monitor to open the quick menu bar:
Open channel switch panel.
Show playback control panel.
Zoom-in mode (select desired channel first before entering zoom-mode).
Select audio channel (live mode only live channels can be selected).
Enter PTZ mode and show PTZ control panel
Recording
• Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.
• When the auto-recording and pre-alarm functions are enabled, the device will start recording
images.
• Default the recording icon (
• In case the motion or alarm detection is activated and a motion or alarm is detected, the motion
(
) resp. alarm (
• When timed recording is enabled, the timed recording icon (
LED is on.
• Default, the device is in HDD overwrite mode and the icon (
Play-back
• Make sure the control panel is not locked and press the PLAY button on the control panel or use
the quick menu bar to open the playback control panel:
A
progress bar
B
playback control
C
event search
Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the
recording must be at least 273 seconds long).
• The fast forward (
speed. Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).
• Press the pause button (
• Press the stop button (
• Press the SLOW button once to set play-back speed to 1/4
Search
• There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.
01/06/2010
) is shown.
) icon is shown.
) and fast rewind (
) to temporary suspend video play-back.
) to return to live monitoring.
DVR16H1
alarm mode
operator logged on
) is showed and the timed recording
) is shown.
D
information
E
close
) buttons will increase resp. decrease the play-back
th
and twice for 1/8
8
th
.
©Velleman nv