Technical Information - Haverland RC-A 2013 Manuel D'installation Et Utilisation

MODELS RC-A
MODELS
RC-A
RC 4 A
RC 6 A
RC 8 A
RC 10 A
RC 12 A
FIG. Nº. 1

TECHNICAL INFORMATION

FIG. Nº. 2
WATTS VOLTS
(W)
500
750
1000
1250
1500
WORKING OF THE RC-A MODELS WITH
ELECTRONIC THERMOSTAT
SWITCH
• Connect the appliance to the power supply with the switch in
position 0 (Fig.1).
• Switch on the transmitter turning the commutator to the position I.
LIGHT
The appliance has a built in thermostat that can be regulated and it
controls the temperature.
AMBIENT
• The light will turn on indicating that the radiator is working.
THERMOSTAT
• To s e t t l e the room temperature, turn the electronic thermostat
control knob to the desired position. Once the comfort temperature
- 12 ºC
is reached, the pilot light will be off.
ANTIFREEZE
The electronic thermostat will maintain a constant temperature
12 - 18 ºC
ECONOMY
• The thermostat has an antifreeze position. With the thermostat
control at minimum, the transmitter connected to the power supply
13 - 25 ºC
and the switch control knob in the position I, the appliance will start
COMFORT
working when the room temperature goes down to 5ºC.
All our thermal transmitters have a rating label on their right side
explaining their characteristics as follows (Fig.2):
1) The transmitter model(here the number of elements that the
transmitter model is made up of and the type of thermostat it
has, are described):
2) The power of the transmitter (expressed in Watts).
3) The tensión (Volts) and the frequency (Hz) that has to be
applied to the transmitter.
MEASUREMENTS
IN mm.
(V) ~
L X W X D
230 435 X 580 X 94
230 593 X 580 X 94
230 751 X 580 X 94
230 909 X 580 X 94
230 1067 X 580 X 94
RC 12 = block of 12 elementos.
A = Electronic Thermostat.
15
Nº. OF FINS
4
6
8
10
12
.