Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
These instructions are only meant as a general guide due to the number of
different makes & models. For vehicle specific questions contact your vehicle's
manufacturer.
Camera installation
The camera can be tilted vertically to adjust the viewing angle. Make sure that its field of
view is not obstructed. There are several ways to mount the camera on the back of your
car. But the most convenient is to mount it near the license plate. Supplied is a mounting
plate that can be fixed behind the license plate. The camera itself can fixed on this
mounting plate.
Please note: At some vehicles it may not be possible to mount the camera near the
license plate. You may have to find another spot at the back of your car to mount it.
1. Remove the rear license plate, and then loosen the license plate´s bolts/screws.
2. Position the supplied mounting plate (together with the camera) behind the license
plate bracket. Secure both license plate bracket and mounting plate with the license
plate bracket bolts/screws.
3
Publicité
Table des Matières
