PROUSER DRC7010 Mode D'emploi page 10

SETUP Menu
Select the desired sub-menu with the Up/Down buttons and confirm with the OK button.
The respective functions of the sub-menus are being described below.
SETUP-AUTO DISPLAY
This setting allows you to set your main view: The selected camera (CAM1 or CAM2) will
be displayed automatically when backing up. In order to show the picture of both
cameras at the same time, please select SPLIT in the menu (only if both signals can be
received – otherwise the monitor will show the available picture in fullscreen).
SETUP-MIRROR
Select CAM1 or CAM2 in order to mirror the displayed picture horizontally or vertically.
10