Preparation For Use; Antenna/Cable Connections - Magnavox CMWC13D6 Manuel

P
REPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with
this unit as shown below.
Cable
OR
Antenna
TV signal
Incoming cable from home
Antenna / Cable Company
(No Cable Box)
OR
Incoming cable from Cable Company
or Satellite Antenna
NOTE:
Before plugging the antenna into the ANT. jack of the
unit, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then plug the pin into
the ANT. jack of the unit.
For your safety and to avoid damages to the unit, unplug the antenna cable from the
ANT. jack before moving the unit.
6
EN
All manuals and user guides at all-guides.com
Cable Box or Satellite Box*
ANT.
ANT.
*NOTE
(DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled
signals and require a special converter to
receive these channels. Consult your local
cable company.
Bent pin
Cable Plug
(Needs to be straightened)
Rear of the unit
(Straight pin)