Using Your Dryer - Kenmore 110.60372710 Guide D'utilisation Et D'entretien

Select a drying temperature based on the fabrics in your load.
If you are unsure of the temperature to select for a load, select
the lower setting rather than the higher setting.
Temperature Tips
A High heat setting may be used for drying heavyweight
■
items, such as towels and work clothes.
A Medium to Medium High heat setting may be used
■
for drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and some
knits.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating
this appliance.
1.
Clean the lint screen
Clean the lint screen before each load. Pull the lint screen out
of its holder. Roll lint off the screen with your fingers. Do not
rinse or wash screen to remove lint. Push the lint screen firmly
back into place. For additional cleaning information, see the
"Dryer Care" section.
Setting the Dry Temp
A Low heat setting may be used for drying lightweight
■
items, such as lingerie.
Use an Air (no heat) setting for foam, rubber, plastic,
■
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
■
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.

USING YOUR DRYER

2.
Load the dryer
Place laundry in the dryer. Close the door. Do not tightly pack
the dryer; clothes should be able to tumble freely.
7