Bushnell DIGITAL NAVIGATION 70-0002 Manuel D'instructions page 4

S T
ETTING THE IME
Default Time Mode / Time Settings
Press MODE button until Time Mode is displayed. Press and hold down ADJ for 3 seconds. Press
UP or DOWN button until desired value appears, and then press MODE button for next setting.
Press ADJ button at any time to save changes and exit. When this is done, seconds will be reset
to 00. A small "A" or "P" will be to the lower left of the hours to denote AM or PM.
Date Settings
When setting the date the year is also displayed. Press MODE
button until Time Mode is displayed. Press and hold down ADJ for
3 seconds. Press MODE button and scroll to desired setting to
change. Press UP or DOWN button until desired value appears, and
then press MODE button for next setting. Press ADJ button at any
time to save changes and exit.
For 24/12 hour setting press MODE button until Time Mode is
displayed. Press and hold down ADJ for 3 seconds. Press MODE
button and scroll through settings until 24/12 hour setting appears,
then press UP or DOWN button to enter desired setting. Press ADJ
button at any time to save changes and exit.
4
New Settings
T
EMPERATURE
Temperature Mode
Press MODE/NEXT button until Time Mode is displayed. If
already in Time Mode then just press MODE/NEXT button and
Temperature Mode is displayed. Press UP or DOWN button to
toggle between Celsius and Fahrenheit readings.
A
LARM
Alarm Setting Mode
Press MODE button until Alarm Mode is displayed. The alarm
consists of 5 alarms, 4 for Time and 1 for Temperature. Press UP or
DOWN button to scroll through the different alarms. Press and
hold down ADJ for 3 seconds until the minute blinks, press UP or
DOWN button to adjust to desired values. Press MODE button for
next setting. Press ADJ button at any time to save changes and exit.
The alarm is activated automatically after adjustments have been
made. To stop the alarm from beeping, press any button.
The alarm can also be turned on or off by going to the relevant alarm
and pressing the COMP button to activate alarm function, press again
to activate Snooze function, and press again to de-activate alarm.
5