Water Drainage - Black & Decker BPACT12H Serie Manuel D'utilisation

All manuals and user guides at all-guides.com
SET UP & USE
WATER DRAINAGE METHOD
This air conditioner is equipped with the very latest MIST technology which
the unit is in HEAT mode. Thus the tank may still require emptying in HEAT
mode.
NOTE: As a safety measure to positively prevent water spillage the air
not restart until the tank has been drained.
INTERMITTENT DRAINAGE (FIG. 10 AND FIG. 11)
• Turn the air conditioner off then drain the water tank by unplugging the drain
required.
• To insure all water has been removed tilt the unit by lifting it slightly upwards
from the front until no more water drains from the outlet.
• Restart the air conditioner by pressing the power button. Ensure that the unit is
in COOL or DRY mode. The compressor will start approximately 3 minutes after
the unit is switched on.
Figure 10
Page 18
Figure 11