Technical Data - VOLTCRAFT DLS-200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Press and hold the Start/Stop button for 5 seconds to start recording. The RECORD LED
will flash 5 times to indicate that recording has started. Tear off the serial number label for
your reference.
Press Button for 5 Seconds
2. While recording, press the Start/Stop button to check the status of the logger.
Status Request
3. Press and hold the Start/Stop button for 5 seconds to stop recording. The ALARM LED will
flash 5 times to indicate that recording has stopped.
Press Button for 5 Seconds
4. When recording has stopped, tear off the transparent plastic cover and connect the logger
to a computer's USB port to view the auto-generated PDF report.
Tear off
Operation Indication
Operation
Status
Action
Start logger
Press and hold for 5 seconds
Start/Stop
Stop logger
Press and hold for 5 seconds
Not started
Press button
Recording
Press button
Status
– OK
request by
Recording –
pressing
Press button
Alarm
Start/Stop
button
Stopped
Press button
– OK
Stopped –
Press button
Alarm
Care and cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
• Clean the product with a dry, fibre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
• Click on the following link to read the full text of the EU declaration of conformity:
conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of
conformity in the available languages.
Disposal
a) Product
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
b) (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them separately from the
product. According to the Battery Directive, end users are legally obliged to return all spent
batteries/rechargeable batteries; they must not be disposed of in the normal household waste.
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold. You thus fulfil your statutory obligations
and contribute to environmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit
and their exposed terminals should be covered completely with insulating tape before disposal.
Even empty batteries/rechargeable batteries can contain residual energy that may cause them
to swell, burst, catch fire or explode in the event of a short circuit.

Technical data

Recording option .......................... Single-use
Temperature accuracy .................. ± 0.5 °C (-20 °C to 40 °C)
LED confirmation
RECORD LED flashes
Temperature resolution ................. 0,1 °C
5 times
Data storage capacity ................... 115,200 readings
ALARM LED flashes 5 times
Shelf life ........................................ 2 years (extreme low or high temperatures may shorten
RECORD LED + ALARM
LED flashes 1 time
Battery .......................................... CR2450
RECORD LED flashes 1 time
Recording interval ......................... 10 minutes
Recording duration ....................... 200 days max.
ALARM LED flashes 1 time
Startup mode ................................ Button
Stop mode .................................... Button or plug into computer's USB port
RECORD LED flashes
Sensor type .................................. NTC
2 times
Protection class ............................ IP67/NEMA 6
ALARM LED flashes 2 times
Certifications ................................. EN12830, CE, RoHS
Report generation ......................... Auto-generated PDF
Connection Interface .................... USB 2.0 A-type
Alarm configuration ....................... Optional
Operating conditions ..................... -30 °C to 70 °C
Storage conditions ........................ -20 °C to 50 °C
Dimensions ................................... 75 mm x 30 mm x 7 mm (L x W x H)
Weight .......................................... Approx. 15 g (with battery)
www.
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
up by manufacturers or distributors within the meaning of the ElektroG
Batteries/rechargeable batteries containing hazardous substances are labelled
with this symbol to indicate that disposal in household waste is forbidden. The
abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb
= Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).
± 1.0 °C (below -20 °C; above 40 °C)
battery life)
0% to 100% RH
<75% RH for -10 °C to 30 °C; <50% RH for 30 °C to 50 °C
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2315346_v4_0522_02_dm_mh_EN

Publicité

Table des Matières
loading

Table des Matières