Use Of Keyboard - Lcd Screen Display; Starting; Factory Settings; Home - Bodet Harmonys Notice D'utilisation Et D'installation

IV - Use of keyboard - LCD screen display

4.1 Starting

1/ In the starting up of the microphone, the LCD screen displays :

4.1.1 Factory settings

1/ Press + approximately 10 secondes in the starting up.
The microphone configures itself with the factory parameters.
During approximately 3 seconds, the microphone displays:
The default configuration is as follows :
- Name : BODET-MAC address
- IP configuration by DHCP
- Multicast synchronisation (broadcast)
- Synchronisation address : 239.192.55.1
- Priority : normal
- Speaker volume : level 5
- Microphone gain : normal
- User language : english

4.2 Home

When the microphone Harmonys is ready for use, the LCD
screen displayss:

4.3 Selection and deselection of zones/groups

The selection of zones / groups is possible only when the product is in «home» mode. Before this
stage («starting» mode), the keys are inactive.

4.3.1 Selection of a zone/group (LED turned off)

1/ Press the key of the zone or group to be selected.
2/ The LED of the key that corresponds to the selected zone or
group is turned on.
3/ The microphone screen displays the name of the
programmed zone or group which is selected:
Note : if a another key is pressed simultaneously, the
microphone only selects the first key pressed. Then the second
button is activated when first released.
All manuals and user guides at all-guides.com
BODET____
Factory
Config.
MICRO
BODET
Name zone
Name group
ON
ON
17