Waeco CoolAir CA-1000-AC Notice De Montage Et D'utilisation page 43

_CA-1000.book Seite 43 Freitag, 28. Juli 2006 10:35 10
CoolAir
✓ The set value is saved and is then used when the system is restarted.
✓ You are now in menu level 4 and can use the + and - buttons to switch
between menu levels.
5.3.6 Menu level 5: Default setting
You can return the parameters you set in configuration mode on menu
levels 1 to 4 to the default settings:
➤ Start configuration mode (see chapter "Start and end configuration
mode" on page 40).
✓ The first digit of the display (see fig. 15 on page 7, 5) shows the menu
level and the second and third show the parameter which can be set.
➤ Press the + button (see fig. 15 on page 7, 6) four times to switch to
menu level 5.
✓ The digital display shows
➤ Press the Mode button (see fig. 15 on page 7, 4) to return the system
to its default settings.
✓ The digits in the display
➤ Press the + button.
✓ The digital display shows
➤ Press the Mode button (see fig. 15 on page 7, 4) to confirm your
entry.
✓ The parameters set in configuration mode are returned to the default
setting.
✓ You are now in menu level 5 and can use the + and - buttons to switch
between menu levels.
All manuals and user guides at all-guides.com
.
00
flash.
00
.
01
Installation
43