Technical Data - LD Systems CURV500IAMP Mode D'emploi

EXIT
To exit the selection menu and show the main display, turn the MENU dial to EXIT (light background) and confirm by pressing the MENU dial.

TECHNICAL DATA

Model number:
Product type:
Type:
Rated output power (1 kHz @ 2,7 Ohm):
Rated output power (1 kHz @ 4 Ohm):
Rated output power (1 kHz @ 8 Ohm):
Rated output power (1 kHz @ 16 Ohm):
Output circuitry:
Frequency response +/- 1dB:
THD:
Protection circuits:
Controls:
Indicators:
AD/DA converter sampling frequency:
AD/DA converter resolution:
Dynamic range:
Maximum delay / Channel:
Equalizer:
Line inputs:
Line input connectors:
Loudspeaker outputs:
Speaker output connections:
Ground Lift:
Cooling:
Operating voltage:
Fuse:
Power consumption @ full load:
Ambient temperature (in operation):
Relative humidity (in operation):
Width:
Height:
Depth:
Weight:
Features:
10
LDCURV500IAMP
DSP controlled amplifier
4-Channel
4 x 240 W (depending on preset)
4 x 240 W (depending on preset)
4 x 120 W (depending on preset)
4 x 60 W (depending on preset)
Class D
10 Hz - 22000 Hz (depending on preset)
< 0,01 % @ 1 kHz (depending on preset)
Over-current, soft-start, DC, thermal overload, short circuit, Multiband limiter
Push-Turn-Control
OLED Display
48 kHz
24 Bit
114 dB
59 m/ 166 ms
10x Parametric / Channel
4
XLR (symmetrical), screw-/plug-in-terminals
4
Speakon compatible, screw-/plug-in-terminals
Yes, GUI integrated
temperature controlled low-noise fan, noiseless in idle mode
Switching power supply, 115 V AC / 230 V AC, 50/60Hz (automatic conversion)
110 - 120V AC: T10AL / 250V
220 - 240V AC: T5AL / 250V
1100 W
0°C - 35°C
<80% (non condensing)
482 mm
44 mm
420 mm
6,8 kg
4-channel DSP controlled, Purpose-designed for CURV500 installations, Smart 19"/ 1U
housing, Each channel can drive up to six CURV500 satellites or one CURV500ISUB subwoofer,
Single push encoder operation, High contrast OLED display, Temperature controlled low-noise
fan, High efficiency switch mode power supply (PFC)