Playing A Dvd Video Or An Audio Cd; Getting Started; Playing A Disc; Using The Dvd Menus - Sylvania DVL100CB Manuel De L'utilisateur

PLAYING A DVD VIDEO
OR AN AUDIO CD

Getting started

Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1
Press the POWER button.
¡
The power will turn on.
2
Press the OPEN/CLOSE button.
¡
The disc loading tray will open.
3
Place a disc into the tray.
¡
Make sure the disc is sitting properly in the correct
recess, with the label side up.
4
Press the PLAY button.
¡
The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
You need to press the PLAY button only when the
tray has been closed by pressing the OPEN/CLOSE
button.
¡
When you play back the DVD which a title menu is
recorded, the menu may appear on the screen. In this
case, refer to "USING THE TITLE MENU".
5
Press the STOP button to stop play.

PLAYING A DISC

Notes
¡
A "prohibited icon" may appear at
the top-right on the TV screen
DVD CD
during operation, warning that a
prohibited operation has been
encountered by the DVD player
or the disc.
¡
If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
¡
With DVDs that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
Some DVDs contain their own menus, such as a
guidance menu which describes the contents of the
disc or a selection menu for sound, language and other
customized settings.
1
¡
The DVD menu will appear.
2
¡ Press the arrow buttons (
setting, and then press the ENTER button.
3
– 13 –

USING THE DVD MENUS

Press the MENU button.
Select the desired title.
L
Playback will start from the selected title.
DVD
/ K /B/s) to change the
EN
1A29