Omega VRT330 Mode D'emploi page 25

IF THE AUGER STOPS WORKING
1
2
CAUTION WHEN USING OPERATION BUTTON
[On]
[Rev]
[Rev]
[On]
[Stop]
Press [Rev] button for 3 to 5 seconds,
then release. When the [Rev] button is
released, the auger will stop rotating.
Repeat this 2 to 3 times. The [Rev] button
pushes the ingredients upward releasing
the food clog.
Press [ON] button to start. When using
[ON] auger should rotate. Wait 2 to 3
seconds. Then presss [REV] button. Repeat
this 2 to 3 times. Make sure the auger stops
completely after releasing the button.
Note:
Even after following the directions above,
if the juicer still doesn't work, please
unplug the power cord, disassemble the
chamber set and clean it. Then try again.
To STOP the operation, press the [Rev]
button quickly. The auger will rotate slowly
then stop. After the auger rotation stops
completely, you can press [ON] to continue
operation as normal or hold down the [Rev]
button to push ingredients upward.
23