Information About The Guarantee - JANE MICRO Instructions

5.- MAINTENANCE
Wash the plastic parts with soap and warm water, making
sure you have dried all the parts properly afterwards. To
wash the upholstery take it off the structure. When fitting
the upholstery back on, first fit the underboard and then the
tube structure. 10
Hand wash at temperature no higher than 30°C. Leave to dry
naturally in a shaded place.
If the upholstery is exposed to sunlight for prolonged periods
of time it may affect the colour of the fabric.
For your safety and the good conservation of this product, it
is important to bring it to one of our official workshops for
regular inspections.

INFORMATION ABOUT THE GUARANTEE

This article comes with a guarantee in accordance with the
provisions of law 23 / 2003 of 10th July. Keep your receipt as
proof of purchase, it is essential to present the receipt in the
shop where you bought the product to confirm validity of the
guarantee in the event of any problems.
This guarantee excludes any defects or breakages caused by
inappropriate use of the article or inobservance of the safety
and maintenance rules listed in the instruction pages and
on the care labels, as well as faults caused by wear and tear
through normal use and daily handling.
The label displaying the chassis number of the model should
never be taken off, it contains important information.
Notice:
For the maximum safety and care of your new JANÉ product,
it is very important that you complete the registration card
found on the web page www.jane.es.
This registration means we can inform you, if necessary, of the
evolution and maintenance of your product. Additionally, if
you would like, we can also inform you about new models or
news that we think may be useful for you.
17