Hamilton Beach ST28 Manuel D'utilisation page 5

How to Change Grids
TO CHANGE UPPER GRID:
1
Open lid. Remove installed grid
by pressing the release button in
the direction of the small arrow,
pulling out grid.
TO CHANGE LOWER GRID:
1
Remove installed grid by
pressing the release button in
the direction of the small arrow,
holding grip, and pulling grid up
and out.
840216600 ENv06.indd 5 840216600 ENv06.indd 5
2
Hold both sides of other grid
using grips. Insert two tabs into
the openings in the bottom cover.
2
To reinstall grid, grip lower waffle
grips and insert two tabs into the
openings on the base.
w WARNING Burn Hazard. Do not change hot grids.
3
Push grid release button in the
direction of the small arrow,
press grid into place, and release
button to secure grid in place.
3
Push grid release button in the
direction of the small arrow,
press grid into place, and release
button to secure grid in place.
4
Lower skillet grid does not lock
into place. Simply place skillet
on base, turn handle to align
notched area with release button,
and skillet will be in place.
6/13/12 10:40 AM 6/13/12 10:40 AM
5