Vimar ELVOX PIXEL UP 40415 Manuel Installateur page 10

Masquer les pouces Voir aussi pour ELVOX PIXEL UP 40415:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
PIXEL UP: 40415
1.1 Features
The outdoor station is equipped with:
- interfacing to acoustic devices used by the hard-of-hearing
- speech synthesis for signalling: call status; lock activation; video answering machine service
- echo canceller
- LEDs for signalling: call status; lock activation; video answering machine service
- video camera with zoom&scan function controlled directly from the indoor station
- dusk/dawn function for automatically adjusting the brightness according to the ambient light
- command of an electrical lock connected directly to terminals S+ and S-
- 2 programmable inputs (refer to the installer manual)
- 2 relay outputs (NO/NC)
Technical data:
- Power-over-Ethernet Class 0 power supply (IEEE 802.3-2012)
- Average PoE consumption: 10W
- Operating temperature: -25 °C / +55 °C
- Protection rating: IP54
- Protection rating against impact: IK08
- Display: 3.5", 320 x 480 pixels, 65K colours, 500 lux
1.1.1 Teleloop and control speech synthesis function
The device allows persons with disabilities to listen to the call
audio and receive call status signals via an appropriate hearing
aid.
Enable the hearing aid, referring to its instruction manual.
Control speech synthesis can be enabled via the configuration
software.
1.1.2
Zoom & Scan function
If supported by the indoor station, this function lets you zoom in
on the areas framed by the camera, as shown in the following
figure, using the push buttons or touch screen on the indoor
station. For more information, please refer to the instructions
for the indoor unit.
1.1.3
Picture control
The standard mode provides optimal operation in typical environmental conditions, while the enhanced portrait mode
highlights the caller in a backlit situation (for example at dawn). Selectable via configuration software.
1.1.4 Dusk/dawn function
This lets you enable automatic brightness control of the entrance panel backlighting according to the ambient light
brightness. Selectable via the configuration software.
10
EN

Publicité

Table des Matières
loading

Table des Matières