Rollei Actioncam 540 Mode D'emploi page 8

EN
Battery
1. install and remove the battery
a. Slide the latch to the side and open the cover.
b. Insert the battery into the slot with the correct side and polarity.
c. To take out the battery, remove the cover fist, after that pull out the battery at the tab.
2. Charge the battery
a. Connect camera with the USB cable to a computer.
b. Use an external power adapter to charge the battery (not included).
c. Use a car charger to recharge the battery inside a car (not included).
d. Charge while video function is active (inside the function table Settings the car mode must be
ac-tivated).
Camera WIFI APP
1. Download the APP client (iOS App Store or Google Play Store) and install it to the smart phone, which
displays the "Rollei AC540" application icon after installation. Direct search "Rollei AC540", and click
install. After the installation of the mobile phone interface will appear an APP application icon. Click to
enter the APP "Rollei AC540" interface .
2. Activate the WIFI function
a. You can select "WIFI" in the general setup menu and press "OK" button to activate WiFi. The screen will show the
WIFI icon and some seconds later the WiFi parameter.
7