Memory Function; Cleaning And Storage; Disposal - Beurer EM 29 Mode D'emploi

Pausing a program
If you want to pause a program while it is running, press the Pause button [1]. An acoustic signal sounds and the
pause symbol "II" flashes in the display [6]. The program can be continued by pressing the button [1] again.
Contact detection
If the electrodes are not in contact with the body, the intensity will automatically be set to zero. This prevents un-
wanted electrical stimulation. The intensity cannot be increased if the electrodes are not in contact with the body.

Memory function

The device saves the last program that was set.
After replacing the battery, the device starts again with the first program.

7. Cleaning and storage

Cleaning the control unit
Important
Before beginning the cleaning process, disconnect the connection cable from the control unit and the universal
cuff and remove the batteries.
Clean the control unit after use with a soft, slightly damp cloth. If it is very dirty, you can also moisten the cloth
with a mild soapy solution. Do not use any chemical or abrasive cleaning agents. Ensure that no water gets inside
the control unit.
Cleaning the universal cuff
Important
1. Before beginning the cleaning process, disconnect the connection cable from the universal cuff.
2. Clean the universal cuff carefully in lukewarm, soapy water. Do not use hot water. Afterwards, rinse it well with
water so that no soap remains on the universal cuff.
3. Then carefully pat the universal cuff dry with a towel and leave it to dry.
Warning
• If the universal cuff is damaged, it must be replaced.
• Before repositioning the universal cuff, first clean the body parts to be treated.
Storage
• Switch off the control unit and disconnect the connection cable.
• Remove the universal cuff.
• Disconnect the connection cable from the universal cuff.
• Put the control unit, the universal cuff and the connection cable in their original packaging.
• Store the original packaging in a cool, dry place that is inaccessible to children.
• Remove the batteries from the device if you will not be using it for a prolonged period of time. Leaking batteries
may damage the device.

8. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its service
life.
Dispose of the device at a suitable local collection or recycling point. Dispose of the device in accordance
with the Waste Electrical and Electronic Equipment EC Directive – WEEE.
If you have any questions, please contact the local authorities responsible for waste disposal.
All manuals and user guides at all-guides.com
19