Amana AB2225PEKS Guide D'utilisation Et D'entretien page 21

Troubleshooting
Ice
PROBLEM POSSIBLE CAUSES
Refrigerator is Supply tubing was used to complete
leaking water water connection.
Improper water valve was installed.
Water pressure is low.
Ice forms in inlet
tube to ice maker
Freezer temperature is too high.
All manuals and user guides at all-guides.com
WHAT TO DO
The manufacturer recommends using copper tubing
for installation. Plastic is less durable and can cause
leakage. The manufacturer is not responsible for
property damage due to improper installation or
water connection.
Check water connection procedure. Self-piercing and
0.5 cm saddle valves cause low water pressure and
may clog the line over time. The manufacturer is not
responsible for property damage due to improper
installation or water connection.
Water pressure must be between 137 to 689 kpa to
function properly.
Adjust Freezer control (see page 8). Freezer is
recommended to be approximately -18° C.
20