Mounting The Hood Body - ROBLIN Astra Manuel D'instructions

• Drill ø 8 mm holes at all the centre points marked.
• Insert the wall plugs 11 in the holes.
• Fix the brackets using the 12a screws supplied.
• Fix the back panel (where present) using the 12a screws supplied.
• Screw the two screws 12d supplied onto the
brackets 7.1.
• Hook the hood body onto bracket 7.1, centring it
around the vertical line.
• Use the adjusting screws 12d underneath the
hood to level the hood body.
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid
pipe ø 150 mm.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Remove any activated charcoal filters.
.
17
All manuals and user guides at all-guides.com

Mounting the hood body

Connections
DUCTED VERSION AIR EXHAUST SYSTEM
12.d
ø 150
7.1
GB