Activated charcoal filters (Recirculation version)
• These filters are not washable and cannot be
regenerated, and must be replaced approximately
every four months of operation, or more
frequently with heavy usage.
• Remove the grease filters.
• Remove the saturated activated charcoal filters as
shown (A).
• Fit new filters (B).
• Replace the grease filters.
• 40 W incandescent light
• Remove the metal terminals T fixing the glass
cover or the metal panel.
• Slide the glass cover or the metal panel to the
right until the left hand end is free. Lower it
slightly and slide it to the left to free it
completely.
• Replace the light with a new one of the same
type and rating.
• Replace the glass cover or the metal panel in
the reverse order.
21
All manuals and user guides at all-guides.com
REPLACING THE ACTIVATED CHARCOAL FILTERS
Lighting
LIGHT REPLACEMENT
B
T
A
GB