Cleaning And Care - AEG Gourmet PRO Serie Mode D'emploi

Assembling the attachments
1. Assembling the Large multi knife
GB
/ chopping blade: Fit the Large
processing Bowl as previously
described. Fit the Large multi knife,
by pressing it firmly into place on the
Drive Shaft.
Caution! The blades are very sharp!
4. When processing is complete,
remove the attachment and Spindle
from the Processing Bowl before
removing the processed food.
22
FP9300_Premium_FoodProcessor_AEG.indd 22
2. Assembling the discs or Dough
Blade: Fit the Spindle, by pressing it
firmly into place on the Drive Shaft.
Select the desired disc. Fit the disc
by pressing it firmly into place on the
Spindle. Note: The Dough blade and
Whisk disc are assembled firmly with
spindle before pressing it into place on
the drive shaft. All attachments must be
firmly attached/correctly fitted to the
Spindle.

Cleaning and Care

1. Switch the appliance off, remove
the plug from the wall socket and
wait until the tools have stopped
completely. Wipe the Motor Base with
a damp cloth.
Warning! Never immerse the
housing, plug, or cord in water or any
other fluid.
3. Assembling the Small processing
bowl and Small multi knife /
chopping blade: Place the small bowl
within the large bowl. If the small bowl
is misplaced, it is not possible to close
the lid. Fit the Small multi knife by
pressing it firmly into place.
2. Wash all parts, except for the Motor
Base, in warm soupy water. Dry each
part thoroughly before use.
All parts, except for the Motor
Base and Whisk disc, are dishwasher
safe. If using the dishwasher, place parts
only on the top rack of your dishwasher.
2016-02-24 09:10:20
GB