Publicité
Les langues disponibles
Les langues disponibles
5. Loosely install the remaining fasteners (items 1 thru 5) to the tie down
hook as shown in figure 1 & 2.
7. Raise exhaust back into position on exhaust hangers.
©2017 Horizon Global Americas, Inc. -
Printed in Mexico
6. Torque all fasteners - Tighten fasteners to specification using
torque wrench. Note: Access to torque the 4 bumper bracket
nuts may require loosening of the lower bumper fascia. If so,
replace all fasteners and components after torqueing.
be useful to use a deep well socket to tighten the flange nuts.
all M10 fasteners with torque wrench to 55 Lb.-Ft. (75 N*M) and
all 1/2 GR8 fasteners with torque wrench to 110 Lb.-Ft. (149
N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 5 of 15
24933NP
Note: It may
Tighten
8-7-17
Rev. C
Publicité
