Panasonic WV-CF284 Serie Mode D'emploi page 10

r Dip switch
Selects ON/OFF of light control mode,
backlight compensation, Adaptive Black
Stretch or Simple day/night mode.
D/N
ON
OFF
• Simple day/night mode selector [D/N]
ON: The camera selects black-and-
white mode if the picture is dark, or
color mode if the picture is bright
enough.
OFF: Color picture is displayed normal-
ly.
Default setting: OFF
Note: The simple day/night function is
established by utilizing the SENSE
UP function for B/W images. The IR
filter is secured.
• Adaptive Black Stretch selector [B.S.]
ON: The dark area of the object is auto-
matically corrected to lighten it.
OFF: Does not compensate.
Default setting: ON
Important: In the case of "ON" setting,
noise may be increased in the dark
area of the object.
In addition, darkness and brightness
may be emphasized in the vicinity of
the boundary between the dark and
bright areas.
• Backlight compensation selector [BLC]
ON: Compensates the background
matically
object.
OFF: This mode is used when the front
of the object is extremely bright.
Default setting: OFF
Note: Under
extremely
desired compensation effect may
not be achieved even with this mode
set to ON to detect the backlight
level.
10
B.S.
BLC
ALC
ELC
if it is brighter than the
conditions such
strong backlight,
• Light control mode selector [ALC/ELC]
ALC: Adjusts the lens iris automatically.
ELC: This mode is used for manual focus
adjustment.
Default setting: ALC
t Focus lock lever
(WV-CF284/CF284T only)
Fixes the focus position after adjusting.
y Zoom lock lever (WV-CF284/CF284T
only)
Fixes the zoom position after adjusting.
u Azimuth adjuster
Adjusts the azimuth angle of the camera.
i Tilting table
Adjusts the tilting position of the camera.
o Panning table
Adjusts the panning position of the cam-
era.
!0 Panning table lock screw [LOCK]
Fixes the panning table.
!1 Power cable
Supplies 24 V AC or 12 V DC from an
external power source.
!2 AF switch [One Push AF] (WV-CF294/
CF294T only)
Refer to the page 16.
!3 LED for AF (WV-CF294/CF294T only)
!4 Twisted pair wire terminal [! @]
auto-
(WV-CF284T/CF294T only)
Refer to q on the previous page.
!5 Twisted pair wire hole
(WV-CF284T/CF294T only)
as
!6 Focus lever (WV-CF294/CF294T only)
the
!7 Zoom lock lever (WV-CF294/CF294T
only)