Audiovox VXE 7020 NAV Mode D'emploi page 117

pairing your mobile phone with the unit
Your mobile phone can initiate a search for new devices and pair to the unit. The following
paragraphs describes the pairing process.
Note: the following procedures are generic. procedures for pairing mobile phones may
vary slightly from mobile phone manufacturer to mobile phone manufacturer.
1. Touch the MENU button on the front panel to access the source menu.
2. Touch the BT icon on the source menu and the Bluetooth® user interface screen will appear.
3. Touch the Options icon and the following screen will appear:
4. On the Options submenu set the Bluetooth function to ON.
5. On the Options submenu set the Auto Connect function to ON.
6. Set the mobile phone Bluetooth® discover mode to ON.
Note: some discovery modes have a time limit usually a minute before they are
automatically turned off.
7. Touch the "Scan" icon on the unit's Bluetooth® user interface screen. Available devices will
appear with the "Pair" icon next to it.
8. Touch the "Pair" icon on the unit's Bluetooth® user interface screen.
9. A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate
the process.
NotE: some mobile phones require a "pass key" or pairing code to connect. if your
phone requires a pass key or pairing code, you will need to enter this number.
the default pairing code for many mobile phones is "0000". the default code for
the unit is "0000".
10. A prompt to enter a PIN number or passkey for the unit should appear. The default passkey for
the unit is "0000".
11. At this point a prompt stating pairing successful should appear. Another prompt should appear
asking connect to the unit, Yes or NO. Touch Yes. The mobile phone and the unit should
connect. The mobile phone should display a message similar to "Device Connected" and the
mobile phone and the unit are now connected. VXE 7020 NAV will appear on the mobile phone
list of devices.
Bluetooth Option Menu
117