Table Des Matières - hestan KVL Serie Manuel D'installation, D'utilisation Et D'entretien

TABLE OF CONTENTS
1 SAFETY PRECAUTIONS - BEFORE YOU BEGIN
4 MODEL NUMBERS
4 RATING LABEL
5 REGULATORY / CODE REQUIREMENTS
5 USING THE VENTILATION SYSTEM
6 CLEANING AND MAINTENANCE
9 TROUBLESHOOTING
10 DUCTING DO'S AND DON'TS
11 INSTALLATION
16 VENT ACCESSORIES
17 PARTS / SERVICE
17 LIMITED WARRANTY
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
When properly cared for, your Hestan ventilation system will provide safe, reliable service for many
years. When using this ventilation system, basic safety practices must be followed as described in
the following pages.
IMPORTANT: Save these instructions for the local Utility Inspector's use.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please read these Instructions and save them for future reference.
ELECTRICAL SHOCK HAZARD ELECTRICAL SHOCK HAZARD
It is the responsibility of the user to have the appliance connected by a
licensed electrician in accordance with all applicable codes and standards,
including fire-related construction. See step 11 - "WIRING CONNECTION:"
on page 14 for details.
ELECTRICAL SUPPLY AND GROUNDING ELECTRICAL SUPPLY AND GROUNDING
• This appliance must be grounded. See step 11 - "WIRING CONNECTION:" on page 14 for
instructions.
• This appliance must be connected to 120 VAC Single Phase, 60 Hz, with a dedicated 20 amp
circuit.
• OWNER: Have the installer show you where the electric circuit breaker is located so you know
how to shut off the power to this appliance.
Suitable for use in covered outdoor applications when installed in a GFCI protected branch circuit.
©2020 Hestan Commercial Corporation
EN
1