Denon S-32 Manuel De L'utilisateur page 29

Symptom Cause
For some • Station is congested or not
radio stations, currently broadcasting.
"Server Full"
or "Connection
Down" is
displayed and
station cannot be
connected to.
Sound is broken • Network's signal transfer speed
during playback. is slow or communications lines
or radio station is congested.
Sound quality is • File being played has a low bit
poor or played rate.
sound is noisy.
GTunerH
Symptom Cause
Continuous noise • Antenna cable is not properly
is heard when connected.
receiving FM
programs
Hissing or • This may be noise from a TV or
continuous noise interference from a radio station.
is heard when
receiving AM
programs
Countermeasure Page
• Wait a while before trying again. –
• This is not a malfunction. When –
playing broadcast data with a
high bit rate, the sound may
be broken, depending on the
communications conditions.
• This is not a malfunction. –
Countermeasure Page
• Connect the antenna cable 5
properly.
• Connect an outdoor antenna. 5
• Turn off the TV. –
• Change the position and direction –
of the AM loop antenna.
GWireless LANH
Symptom Cause
Cannot connect • The settings of the
to network. and network key (WEP) are
incorrect.
• The reception is poor and the
signals cannot be received.
• There are multiple networks and
the usable channels overlap.
Played sound is • There are multiple networks and
interrupted or the usable channels overlap.
sound cannot be
played.
Countermeasure
SSID • Match the network settings with
the S-32's settings.
• Shorten the distance from the
wireless LAN's access point,
remove any obstacles and
otherwise improve visibility, then
try reconnecting. Also install
away from microwave ovens
and the access points of other
networks.
• Set the access point's channel
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.
• Set the access point's channel
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.
ENGLISH
Page
6
–
–
–