Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Case 2 : Connecting to an Audio
System (Dolby Digital, DTS
Amplifier) - Better Quality
1.
Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the
rear of the player to the DIGITAL AUDIO IN
(OPTICAL) terminal of your Amplifier.
2.
Using the video signal cable(s), connect
the HDMI, COMPONENT or VIDEO OUT
terminals on the rear of the player to the
HDMI, COMPONENT or VIDEO IN terminal
of your TV. (See pages 20~23)
3.
Turn on the player, TV and Amplifier.
4.
Press the input select button of the Amplifier
to select the external input in order to
hear sound from the player. Refer to your
Amplifier's user manual to set the Amplifier's
audio input.
Case 2 : Optical cable
(not included)
Red
White
NOTE
▪
When following the case 2 connection, discs with PCM audio soundtracks will only be heard over the front two
channels.
All manuals and user guides at all-guides.com
Case 3 : Connecting to an Audio
System (2 Channel Amplifier)
- Good Quality
1.
Using the audio cables, connect the AUDIO
OUT (red and white) terminals on the rear of
the player to the AUDIO IN (red and white)
terminals of your Amplifier.
2.
Using the video signal cable(s), connect
the HDMI, COMPONENT or VIDEO OUT
terminals on the rear of the player to the
HDMI, COMPONENT or VIDEO IN terminal
of your TV. (See pages 20~23)
3.
Turn on the player, TV and Amplifier.
4.
Press the input select button of the Amplifier
to select the external input in order to
hear sound from the player. Refer to your
Amplifier's user manual to set the Amplifier's
audio input.
Case 3 : Audio cable
English
Publicité
Table des Matières
