Connecting To An Audio System; Method 1 Connecting To An Hdmi Supported Av Receiver; Method 2 Connecting To An Av Receiver With Dolby Digital Or Dts Decoder - Samsung BD-ES6000 Manuel

Connections

Connecting to an Audio System

You can connect the Blu-ray player to an the audio system using the method illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
• Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to
the Digital Optical In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
16
|
English
Method 1
Audio
Method 2
Audio