Samsung BD-C6300 Manuel page 39

NOTE
▪
You should be able to find the Pass Phrase on one of
the set up screens you used to set up your router or
modem.
Settings
Security Key
Display Network Settings
Security Key
Audio
a b c
lid Only)
System
.,@ abc
1 2
Network
ghi jkl
4 5
Language
pqrs tuv
7 8
Security
a/A/1/ 0
General
Clear All Space
a b
Support
(/) Cursor " Select ' Return
9.
To enter the Pass Phrase, follow these
general directions:
• Press the number keys on your remote to
enter numbers.
• Use the arrow keys on your remote to move
from button to button on the Security Key
screen.
• To enter letters, move to the button labeled
a/A/1/, and then press the ENTER button.
Each time you press the ENTER button,
you change the kind of characters you can
enter (a/A/1/).
• To enter a letter, press the number button
that corresponds to the letter. Pressing the
button repeatedly changes the letter.
• To delete the last letter or number you
entered, move to the Delete button, and
then press the ENTER button.
• To clear all entered letters and numbers,
move to the Clear key, and then press the
ENTER button. You can also just press the
RED(A) button on your remote.
10. When done, press the YELLOW(C) button
on your remote, or move to the Done button,
and then press the ENTER button.
The Network Connecting screen appears.
11.
Wait until the connection confirmation
message is displayed, and then press the
ENTER button. The Network Settings screen
reappears.
12.
To test the connection, press the ▼ button
to select Network Test, and then press the
ENTER button.
All manuals and user guides at all-guides.com
(0)
def
3
mno
6
wxyz
9
Delete
Done
c
Setting Up the Wireless Network Connection
- Manual
If the Auto Setting does not work, you need to
enter the Network settng values manually.
To get the Network setting values from most
Windows computers, follow these steps:
1.
Right click the Network icon on the bottom
right of the screen.
2.
In the pop-up menu, click Status.
3.
On the dialog that appears, click the Support
tab.
4.
On the Support tab, click the Details button.
The Network settings are displayed.
To Enter the Network settings into your player,
follow these steps:
1.
On the Internet Protocol Setup screen, press
the ENTER button.
2. Press the ▲▼ buttons to select Manual, and
then press the ENTER button.
3.
Press the ▼ button to go to the first entry field
(IP Address).
Settings
Network Setting
Display
Access Point Selection : Not Selected
Audio
Internet Protocol Setup : Manual
System
IP Address : 0
Network
Subnet Mask : 255 255 255
Language
Gateway : 0
Security
DNS : Manual
General
: 0
DNS Server
Support
PBC (WPS) > Move " Select ' Return
a
4.
Use the number buttons to enter numbers.
5.
When done with each field, use the ► button
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
6. Enter the IP Address, Subnet Mask, and
Gateway values.
7. Press the ▼ to go to DNS.
8.
Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
\
0 0 0
0
0 0 0
0 0 0

English