Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.
Adjust the height of the inner duct cover to the duct cover-mounting bracket. Secure the
inner duct cover with two (4x8 mm) screws (provided) as shown in Figure 20.
8.
Fasten outer duct cover to multi vent exhaust on the hood with four (4x8 mm) screws
(provided).
9.
Continued at "Install Accessories" on page 16.
Figure 18
Attach Together
Figure 20
14
Figure 19
Publicité
Chapitres
Table des Matières
Dépannage
