Connect Water Supply Line And Drain Hoses - KitchenAid KUDD03DTPA Instructions D'installation

Route water supply line and drain hoses into the cabinet.
Slide dishwasher partway into the cabinet opening. Allow
for access to the electrical terminal box.
Connect Water Supply Line and Drain
1. Connect water supply line to the water valve under the sink.
A. Hot water supply
2. Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
3. Push hose into drain connector until fully seated (Figure B).
Several "clicks" will be heard.
All manuals and user guides at all-guides.com
Hoses
4. Slide clamp into position (figures C and D).
A
C
5. Connect the drain hose using one of the following options:
Option 1: Waste disposer no drain air gap
A
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tighten clamp.
A
B
D
C
B
11