Brentwood Select Easy Pot EPC-636 Mode D'emploi page 4

All manuals and user guides at all-guides.com
Parts:
Before the First Use
Before the first use, please take out all accessories from the package and read this manual carefully.
Please wash the inside of the lid and the inner pot with warm soapy water, rinse and dry thoroughly.
Clean the outside of the cooker base with a clean damp cloth.
Never immerse the cooker base in water or any other liquid. Never clean the cooker base in the
dishwasher. The lid and sealing ring can be washed in the dishwasher. Make sure water is fully drained
after washing. Inspect the lid to ensure that there is no food debris blocking the valves.
Installing the Condensation Collector
To install the condensation collector, slide it into the slot on the cooker base. Follow the reverse order to
remove it for cleaning.
Removing and Reinstalling the Anti-Block Shield The anti-block shield can be removed by pushing it on
the side and outward. To install the anti-block shield, position it in place and press it down.
Removing and Installing the Sealing Ring The sealing ring can be removed by pulling it outward, section
by section, from the sealing ring rack. To reinstall the sealing ring, press it down into the rack section by
section. The sealing ring can be installed with either side facing up.
4