Product Description; Prior To First Use; Setting The Clock - Inventum KZ915GT Mode D'emploi

2

product description

1. Cover bean holder
2. Coffee bean holder
3. Rotary knob fine/coarse grind
4. Operating panel
5. Filter holder
6. Filter outlet with drip stop
7. Glass jug
8. Hot plate
9. Release button filter holder
10. Water reservoir
11. Gauge glass
12. Measuring spoon
3
prior to first use
Before using the coffee machine for the first time, proceed as follows: Carefully unpack your coffee machine and remove all
packaging material and possible promotional stickers. Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the coffee machine on a flat, stable and heat-resistant surface. Check that the voltage stated on the information plate matches
the mains voltage used in your region.
It is best to clean the interior of the new coffee machine prior to using it for the first time. Clean the appliance as described in section
cleaning and maintenance. Then fill the water reservoir with cold water up to the MAX 12 mark and allow the appliance to make two or
three runs without coffee.
4

setting the clock

1. Switch on the appliance by pressing the on/off button (
the display, indicating the time 12:00. If you do not set the time, the clock will continue to flash when switching on the appliance,
and you will not be able to use the timer function of the appliance.
2. Press button to set the correct hour (the clock has a 24 hour format).
3. Press button to set the correct number of minutes.
4. Once you have set the time, the clock will stop flashing. When the appliance is disconnected from the mains, the clock must be
set again.
2
3
4
5
6
7
12
8
). When switching on for the first time, the time display flashes on
1
9
10
11
English •
15