THOMSON THV 6400 Notice D'utilisation page 28

• The piece of furniture or the support in which the hob has to be fitted, as well as the edges of
furniture, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 100 °C.
• The mural rods of edge must be heat-resisting.
• Do not install the hob to the top of a non ventilated oven or a dishwasher.
• If a drawer is below the hob, to guarantee a good air circulation and good cooling system of
the appliance, maintain a gap of 20 mm minimum between the bottom of the drawer and the
inferior part of the hob.
• WARNING: The safety gap between the hob and the cooker hood placed above must respect
the indications of the hood manufacturer. In case of absence of instructions respect a distance
minimum of 760 mm.
• If a drawer is placed under the work, avoid to put into this drawer flammable objects
example: sprays) or not heat-resistant objects.
• The connection cord should be subjected, after built-in step, to no mechanical constraint, such
for example of the fact of the drawer. Materials which are often used to make worktops can
expand on contact with water. To protect the cut out edge, apply a coat of varnish or special
sealant.
• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or
indicated by the manufacturer of the appliance in the instructions for use as suitable or hob
guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
All manuals and user guides at all-guides.com
27
(for