Use; Sensitive Touches; Display; Residual Heat Indication - THOMSON THV 6400 Notice D'utilisation

USE

Sensitive touches

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
touches the key, the corresponding command is activated. This activation is validated by a control
light, a letter or a number in the display and/or a "beep" sound.
Touch only one key on the same time.

Display

Display
0
1...9
A
E
H
L

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire.

STARTING UP THE APPLIANCE

Before using your new hob

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which
risks causing blue-tinted colour on the glass surface.

Starting-up

• Start-up/ switch off the hob
Action
To start
To stop
• Start-up/ switch off a heating zone
Action
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.
All manuals and user guides at all-guides.com
Designation
Zero
Power level
Heat accelerator
Error message
Residual heat
Locking
Control panel
press key [ ]
press key [ ]
Control panel
press key [ + ]
press key [ - ]
press simultaneous [ + ] and [ - ]
or press key [ - ]
Function
The heating zone is activated
Selection of the cooking level
Automatic cooking
Electronic failure
The heating zone is hot
The control panel is locked
22
Display
[ 0 ]
nothing or [ H ]
Display
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]