Technical Specifications - Fagor BB-160 Manuel D'utilisation

Pèse-personnes
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
interior
30/6/05
16:09
1. INTRODUCTION
Dear customer,
We recommend you read this instruction
manual carefully before using the scales for
the first time, in order to use them correctly.
You should also keep this manual for further
reference.
2. APPLIANCE DEFINITION (FIG. 1)
1. Digital display
2. Weighing surface
3. Battery compartment
Interference suppression: The
interference of this appliance has been
suppressed in accordance with interference
suppression standards.
Electromagnetic compatibility: This
appliance complies with the CEM standards
of electromagnetic compatibility.

3. TECHNICAL SPECIFICATIONS

Capacity 150 Kg.
Division 100 g
Four 1.5V batteries (not included)
Foot pressure switch-on
Automatic reset to zero
Automatic switch-off
Overload indicator
Battery low indicator
4. ADJUSTMENT
Insert four 1.5V batteries in the battery
compartment (3) at the rear of the scales,
ensuring the polarity is as shown. Use
ALKALINE batteries only.
If the scales are to be out of use for some
time, remove the batteries.
Página 4
EN
Step 1. Place the scales on a hard, flat
surface (do not place them on a
carpet). To guarantee maximum
accuracy and repeatability of the
readings, always weigh yourself
with the scales in the same place.
Step 2. Switch on the scales by gently placing
your foot on the front right part. The
sequence is as follows:
The scales are now ready for you to
stand on them and weigh yourself.
Important: If you stand on the
scales before "0.0" appears on the
display, the error message will
appear:
If this happens, wait for the scales
to switch off and go back to Step 2
again.
Step 3. Stand carefully on the scales. Place
your feet firmly on the weighing
surface and stand still until the
scales calculate your weight. Your
correct weight will be shown as
follows:
NOTE: The scales round off your
weight to the nearest 0.1 kg or 0.2
kg. If you weigh yourself twice and
obtain two different readings, this
means your weight is between the
two.
Step 4. When you step off the scales they
will automatically switch off. They
will also switch off if no-one stands
on them for around 8 seconds.
5
5. FUNCTIONING
This means: 68 kg and 300g

Publicité

Table des Matières
loading

Table des Matières