Angelo Po 0G1FR3G Manuel D'utilisation Et D'installation page 31

– Use the appliance only for the functions intended
by the manufacturer. Improper use of the appli-
ance may involve health and safety risks and
economic losses.
– All servicing operations requiring specific techni-
cal knowledge or skills must only be carried out
by qualified staff with recognised experience in
the specific sector.
– Clean all parts which may come into direct or in-
direct contact with foods, and all the surrounding
areas, with care in order to maintain hygiene and
protect foods from all forms of contamination.
– When cleaning, use only food-approved deter-
gents. Never use corrosive or flammable clean-
ing products, or products which contain any
substances harmful for human health.
– Carry out cleaning procedures when reasonably
necessary, and always after each use of the ap-
pliance.
– When cleaning and sanitising the appliance with
detergents, always wear personal protection
equipment (gloves, masks, goggles, etc.) as re-
quired by the relevant health and safety legisla-
tion.
– At the end of each session of use, make sure that
the burners are off, with the control knobs turned
off and the gas supply lines disconnected.
– In the event of lengthy periods out of use, thor-
oughly clean all internal and external parts of the
appliance and the surrounding area (in accord-
ance with the manufacturer's instructions) and
disconnect all supply lines.
– During routine use of the appliance, the Opera-
tor's constant presence is required.
– When washing the appliance do not point pressu-
rised water jets at internal parts.
– Do not leave flammable objects or materials
close to the appliance.
Important
The batch load max is 2,5 Kg for single
well.
- 7 -
IT
GB
DE
FR
ES
English