Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB Installation and operating instructions
Built-in spotlight, swivelling, for indoor use
Art. No. 23930,23932,23933,23934
Thank you for deciding on the purchase of one of our built-in spotlights.
Our built-in spotlights are manufactured from stainless metal to provide you with attractive lighting.
This provides an appealing look and high corrosion resistance. The built-in spotlight is suitable for use
in indoor areas.
Please read these operating instructions through carefully before use and keep them for future
reference.
We accept no responsibility for material or personal damages caused by failure to observe these
instructions, unauthorised modifications to the product or improper use.
Contents:
1 built-in spotlight
1 connection cable with AMP plug
Installation and operating instructions
Technical data:
Conn-
Article
ection
23930
12 V
23932
12 V
23933
12 V
23934
12 V
The built-in spotlight must only used outside the packaging.
Before using the built-in spotlight, check to ensure that this has not been damaged in any way
during transport. In the event of damage to the cable or electrical components, the built-in
spotlight must not be used.
Keep the packaging material away from children and household pets. Danger of suffocation!
Caution! The packaging contains small parts that could be swallowed by children.
Safety and warning instructions:
In case of damage to the spotlight or the cable, use of the spotlight is strictly prohibited.
Never attempt to repair defective parts yourself. Repairs must be carried out only by qualified
specialists.
Do not allow children to play in the area of lamps or other electrical equipment without
supervision.
The bulb becomes hot during use. The outer lamp housing also becomes hot. Never touch the
lamp with your bare hands when in use.
The built-in spotlight must not be covered by other objects.
The product must not be modified or converted. Modifications to the built-in spotlight will
invalidate the guarantee.
Care and maintenance:
Ensure that the power supply is completely disconnected before cleaning.
Use only a dry or slightly damp cloth for cleaning.
Never use any chemicals or abrasive agents for cleaning.
Installation instructions Art. No.23930,23932,23933,23934
Bulb
1x max. 35 W cold-light mirrored lamp MR 16 GU 5.3
or LED max. 7W
1x max. 35 W cold-light mirrored lamp MR 16 GU 5.3
or LED max. 7W
1x max. 35 W cold-light mirrored lamp MR 16 GU 5.3
1x max. 35 W cold-light mirrored lamp MR 16 GU 5.3
or LED max. 7W
Page 1 of 2
Install-
Protection
ation
class
III, IP 20
75 mm
III, IP 20
75 mm
III, IP 20
75 mm
III, IP 20
®
Allmendring 29
Date 02.2017
Publicité
Table des Matières
