ENGLISH
WARNING
Sunrise Medical recommends that a clinician such as a
doctor or therapist experienced in seating and positioning be
consulted to determine if a Jay Easy Back is appropriate.
Backs should only be installed by an authorized Sunrise
Medical supplier.
THE Jay Easy Back (Fig.1.0)
The Jay Easy Back is designed to provide the important
benefits of a proper back support for a wide variety of
wheelchair users.
It is designed to provide simple, comfortable and effective
support to help maximise function and increase sitting
tolerance. In addition, it is light-weight, durable and easy to
use. The back can be installed onto a wide range of
wheel chairs.
The intended lifetime of the back rest is 4 years
Maximum user weight: 136kg (300lbs).
WARNINGS
•
Installing a back support on a wheelchair may affect
the centre of gravity of the wheelchair and may cause
the wheelchair to tip backwards potentially resulting in
injury.
•
Always assess for the potential need for anti-tippers
or amputee axle adapter brackets to be added to the
wheelchair to help increase stability.
•
Do not use the back to push or lift wheelchair. Improper
use may cause the back to unexpectedly detach from
the wheelchair.
•
Carelessness causes fire.
IMPORTANT
Please read and understand this Owners Manual
thoroughly before using the product.
1
2
We at SUNRISE MEDICAL have been awarded the ISO-13485 certifi cate, which affi rms the quality of our products at every stage, from R & D to production. This
product meets the requirements in accordance with EU regulations. Options or accessories shown are available at extra cost.
The varieties of backrest fi tting variants, as well as the diff erent positioning components to deliver postural support, pressure distribution, increase seating tolerance are
benefi ts according to each user requirement and indication, mean that it can be used by a range of users with diff erent positioning needs and indications as follows:
- Spinal Cord Injury
- MS
- Neurological disease pattern (hemiplegia, M. Parkinson)
- Extremity defect deformity
- Joint contracture
No contraindications are known or available.
Jay Easy Back 122915
Type:
Product Name
LOT: defi ned
Date:
by Julian Date
Seat width
XXX mm
Seat depth
XXX mm
kg
Max user
weight
XXX kg
- Amputation
- Tetraplegia
- Cerebral Palsy
- Muscle Dystrophy
FIG.1.0
LUMBAR POSITIONING
COMPONENT
SHELL
.
HARDWARE
RECEIVERS
CE Mark
Date of
XXXX-XX-XX
Manufacture
Assembly Part
Part Code
Number
This symbol
means Medical
Device
Manufacturer
European
Authorised
Representative
6
INTRODUCTION
OUTER COVER
FOAM & INNER COVER
Rev.E