Safety Instructions Relating Specifically To The Equipment - MeisterCraft MPF 400 Traduction Du Manuel D'utilisation Original

5455800-Powerfeile-man 04.03.14 09:35 Seite 32
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to
operate the power tool. Power tools
are dangerous in the hands of
untrained users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
32
representative.
All manuals and user guides at all-guides.com
6 – Safety instructions
relating specifically to
the equipment
• Use only for dry sanding tasks.
• Do not use in stationary operation.
• Before each use, check the machine
and sanding belt for damages.
• Breathing in sanding dust is
dangerous, for example, when
sanding paint that contains lead and
some varieties of wood, i.e. oak, or
metal dust. Thus, always work with
the dust collection mechanism
attached.
• Do not process materials containing
asbestos.
• Do not bend the sanding belts.
• Never process both wood and metal
with the same belt.
• Were a dust mask and protective
goggles when sanding.
• We also recommend wearing ear
defenders.
• Secure the piece you are working on
to make sure it cannot slip, for
example, with a vice.
• Only use sanding belts with the
specified dimensions.
CAUTION! Before changing the
belt, unplug the power cord!
• When working, hold the machine
tightly and guide it with both hands.
• Before each use, adjust the belt guide
carefully.