Samsung WW10J5 Serie Manuel D'utilisation page 47

Problem
Load is wet at the
end of a cycle.
Leaks water.
Has odours.
No bubbles are seen
(Bubbleshot models
only).
Wi-Fi does not work
(Wi-Fi models only).
If a problem persists, contact a local Samsung service centre.
WW10J5260GW_03504U-01_EN.indd 47
• Use the High or Extra High spin speed.
• Use high efficiency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
• Make sure the drain hose is not kinked or clogged.
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and
secured to the drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitize periodically.
• Clean the door seal (diaphragm).
• Dry the washing machine interior after a cycle has finished.
• Overloading may screen bubbles.
• Severely contaminated laundry may not generate bubbles.
• Make sure the Internet connection to your house is properly
established.
• Make sure the router turns on and operates normally.
• Make sure you have installed the latest version of the Smart
Control App.
Action
English 47
2016/4/1 13:40:30