Paradigm Garden Oasis GO4 Manuel De L'utilisateur page 9

5 . Using a mallet and
a wooden block,
pound the ground
stake into the
ground . Drive the
ground stake down
until the ground
stake flange is
nearly flush with
the surface . Note:
Leave a slight
gap between the
ground stake
flange and the
ground surface
in order to thread
speaker wiring
through the wiring
hole in the ground
stake .
7 . To attach the
speaker to the
ground stake,
hand thread the
twist cap to the
ground stake .
6 . Thread the
speaker's wiring
through the
wiring hole in
the ground stake .
8 . The speaker is
now mounted to
the ground stake .
The next step is
wiring, go the
'Wiring' section
for instructions .
For wiring instructions see 'Speaker & Burial Cable Connections' on page 11 .
EN |
8