WIRING & SPEAKER INSTALLATION (CONT'D)
Installing Ground Stake Accessory & Attaching Speaker
1 . Remove nut from
the threaded end
of the speaker arm .
3 . Slide the twist cap
over the speaker
arm then slide
the gasketed
aluminum washer
(from the ground
stake) over the
threaded end of
speaker arm .
IMPORTANT!
The face of
the aluminum
washer with the
smaller rubber
gasket must be
facing up.
7 | EN
2 . Remove the twist
cap and gasketed
aluminum washer
from the ground
stake accessory .
4 . Using a wrench,
thread and firmly
tighten the nut
(removed in
step 1) over the
threaded end of
the speaker arm .