Optional Inground Conduit Box; Option 1: Pvc Conduit Installation - Paradigm Garden Oasis GO4 Manuel De L'utilisateur

OPTIONAL INGROUND CONDUIT BOX

Following the same instructions outlined for the ground stake
or surface mount accessory . The Garden Oasis Inground
Conduit Box can be substituted . Knock out holes in the
Inground Conduit Box as needed . Conduit is sold separately .
Included:
• (1) Inground Conduit Box
• (1) Two Piece Mounting Post
• (8) Stainless Steel Screws
• (4) Ground Stakes
Recommended Tools:
• Drill
• PVC Glue – for PVC conduit or fittings
• Silicone Caulk
• Shovel
• Hammer
• #2 Phillips Screwdriver
• Wrench
Installation Instructions
*IMPORTANT! Test your system before gluing
or caulking any part of the Inground Conduit
Box or any conduit piping connections. Use
silicone caulk to seal any openings used for cable.
Allow caulk and glue to dry completely before burying
the Inground Conduit Box.
OPTION 1: PVC Conduit Installation – Knock out the conduit
openings to be used . Glue the conduit piping to the Inground
Conduit Box . * Draw the cable through the conduit and pull at
least 8 inches of cable into the box cavity .
Note: The Inground Conduit Box openings are 3/4" in diameter.
Other conduit piping sizes may be used with adapters.
EN |
12